Hybrid PCB Board

High-frequency circuit board, high-TG FR-4 PCB with immersion gold, and hybrid PCB stackup SCGA-500 GF265 PTFE

PCB hybrid on 4 mil High frequency 6 layer rigid PCBs are made by Isolar (370HR) and Rogers RO4835 PCB

Rogers 6-Layer RO3003 RF PCB bonding by Taconic FastRise-28 Prepreg for High Speed Signal Transmission

Hybrid PCB Built on SCGA-500 GF265 High Frequency Material and High Tg FR-4 With Immersion Gold

3 Layer Hybrid PCB Board Made On 13.3mil RO4350B and 31mil RT/Duroid 5880 for Multicoupler Antenna

10 Layer High Frequency PCB Built On 5 Cores of 10mil RO4350B with 4mil RO4450F for Broadband Wireless Solutions

6 Layer High Frequency PCB Built On 3 Cores of 20mil RO4003C and 4mil RO4450F for Radar Altimeter

4 Layer High Frequency PCB On 2 Cores of 32mil 0.813mm RO4003C and 12mil RO4450F for Ultrahigh Frequency Coupler

4 Layer RF Circuit Board On Rogers 60mil RO4350B and 10mil RO4350B with Back Drill for UHF Coupler

4 Layer High Frequency PCB Built On 2 Core of 10mil RO4350B with Immersion Gold for Wireless Antenna System

4-layer Rogers High Frequency PCB with Immersion gold 16mil RO4003C PCB green for LNB's for Direct Broadcast Satellites

6 Layer Mixed PCB On 20mil 0.508mm RO4350B and FR-4 with Blind Via for Digital Satellite Receiver

6 Layer Mixed PCB Built On 10mil 0.254mm RO4350B and FR-4 with Blind Via for Digital Radio Antennas

5 Layer Hybrid PCB Built On 10mil RO4350B and FR-4 with Immersion Gold for 2.4 Ghz Antenna

4 Layer Hybrid PCB Made On 20mil RO4350B and FR-4 for GPS Transceiver

4 Layer Hybrid PCB Board Built On Rogers 10mil RO4350B and FR-4

Layer Hybrid PCB Board Build On 4mil Rogers RO4350B and High Tg FR-4 for 4G Signal Booster

4 Layer Hybrid PCB Board Bulit On Rogers 20mil RO4003C and FR-4

4 Layer High Frequency PCB Board Bulit On Rogers 12mil RO4003C and FR-4 for Automotive Radar and Sensors

4 Layer Hybrid PCB Built On 8mil 0.203mm RO4003C and FR-4 for Phased Array Antennas