IEC62368 Test Equipment And Measuring Equipment Hydraulic
Price: 1
MOQ: 1
Delivery Time: Negotiable
Brand: KINGPO
High Light:IEC 62368 Testing And Measuring Equipment, Test Equipment IEC 62368-1, SGS Hydraulic Test Equipment
IEC 62368 Test Equipment.IEC 62368-1 TESTING AND MEASURING EQUIPMENT No. Items Description 1 Temperature and humidity chamber IEC62368-1-cl.4.1.4 Model:KP-HWS1000L 2 Test Apparatus for device forming mains plug IEC62368-1-cl.4.7 Model :KP-LJ220 Technical Parameter: 1. As per IEC60065-fig11 2. Weight... View More
➤ Visit Website
High Accuracy Battery Testing Machine / Thermal Abuse Tester KP-8103
Price: To be quoted
MOQ: 1
Delivery Time: 35 working days
Brand: KingPo
High Light:Battery Testing System, Battery Test Chamber, Thermal Abuse Tester KP-8103
Battery Thermal Abuse Tester Usage: It can be applied to conduct a moulded case stress at high ambient temperatures,Thermal abuse and heating test. 1. Test the fully charged battery for 7 hours at 70±2℃ temperature,then remove it from oven and cool it down to room temp.Battery qualified without phys... View More
➤ Visit Website
IEC 62368-1 Annex E Pink Noise Generator,Meets The Requirements For Pink Noise In IEC 60065 Clause 4.2 And 4.3
Price: To be quoted
MOQ: 1
Delivery Time: 7 work days
Brand: Kingpo
High Light:IEC 62368-1 Pink Noise Generator, IEC 60065 Pink Noise Generator, 1000 Hz Pink Noise Generator
This Pink Noise Generator meets the requirements for pink noise in IEC 60065, Clause 4.2 and 4.3 and IEC 62368-1, Annex E. It is especially developed for all types of tone frequency amplifiers,when you need 2 channels/phase 90° Technical Specification •Pink noise or sine wave 1000 Hz (not at the sam... View More
➤ Visit Website
AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2
Price: To be quoted
MOQ: 1
Delivery Time: 30 working days
Brand: KingPo
High Light:AS/NZS 3112 Pin Bending Tester, Calibration Certificate Pin Bending Tester, Clause 2.13.7.2 Pin Bending Tester
AS/NZS 3112:2011 Clause 2.13.7.2 Force for pin bending tester 2.13.7.2 Pin bending test All flat pins of plugs rated up to and including 15 A shall be subjected to a pin bending test. Three sample plugs not subjected to any previous tests shall be tested as follows: Pins of assembled plugs shall be ... View More
➤ Visit Website
ISO 5356-1 Medical Gauge For Testing HME Patient Port Connector
Price: To be quoted
MOQ: 1
Delivery Time: 7 working days
Brand: Kingpo
High Light:iso5356 1 medical gauge, medical gauge iso 5356, hardness steel medical gauge
ISO5356-1 Gauges For Testing HME patient port connector ISO 5356-1 Anesthetic and Respiratory Equipment – Conical Connectors – Part 1: Cones and Sockets ISO 5356-1 Introduction In clinical practice, several breathing attachments used in anaesthetic and respiratory equipment may have to be joined tog... View More
➤ Visit Website
ISO 16750-4 Figure 4 IP Testing Equipment Stainless Steel Test Set Up For Splash Water Test Jet
Price: To be quoted
MOQ: 1
Delivery Time: 7 working days
Brand: Kingpo
High Light:rain test equipment, salt spray test chamber
ISO 16750-4 Figure 4 Stainless Steel Test Set - Up For Splash Water Test Jet 5.4.2 Splash water test 5.4.2.1 Test method Heat the DUT in a hot air oven at Tmax for the specified holding time,th. Then splash the DUT with ice water for 3 s. If the DUT is splashed in the vehicle from only one direction... View More
➤ Visit Website
KP9280 Pink Noise Generator IT Test Equipment IEC 60065 Clause 4.2 And 4.3 And IEC 62368-1 Annex E
Price: To be quoted
MOQ: 1
Delivery Time: 7 work days
Brand: Kingpo
High Light:IEC 60065 Pink Noise Generator, 1000 Hz Pink Noise Generator, Two Output Channels Pink Noise Generator
This Pink Noise Generator meets the requirements for pink noise in IEC 60065, Clause 4.2 and 4.3 and IEC 62368-1, Annex E. It is especially developed for all types of tone frequency amplifiers,when you need 2 channels/phase 90° Technical Specification •Pink noise or sine wave 1000 Hz (not at the sam... View More
➤ Visit Website
UL Rain Test Water Spray Nozzle.UL60507-ENGL 1999 ANSI Z21.58 CSA4.3-2004 Water Spray Nozzle For Rain Test Apparatus
Price: To be quoted
MOQ: 1
Delivery Time: 25 working days
Brand: Kingpo
High Light:ANSL B94.11M Water Spray Nozzle, UL60507-ENGL 1999 Water Spray Nozzle, CSA4.3-2004 Water Spray Nozzle
UL Rain Test Water Spray Nozzle The main function of the equipment is to test the physical and other related properties of electronic and electrical products, lamps, cabinets, electrical components and other products under simulated rainy weather conditions. After testing, the performance of the pro... View More
➤ Visit Website
Multilingual Accelerated Weathering Test Chamber / Environmental Simulation Aging Test Machine
Price: To be Quoted
MOQ: 1
Delivery Time: 35 working days
Brand: Kingpo
High Light:temperature and humidity chamber, climatic test chamber, Multilingual Weathering Test Chamber
Accelerated Weathering test Chamber / Environmental simulation Aging Test Chamber Features 7” LCD controller with English interface Inner made of SUS#304 stainless steel material Meet all requirements for extreme testing and low temperature alternating Working hours up to 4,320 hours testing without... View More
➤ Visit Website
Copper Block With Omega K - TypeThermocouple IEC 60695-11-5 Fig A.1 Standard
Price: To be quoted
MOQ: 1
Delivery Time: 7 working days
Brand: Kingpo
High Light:Needle Flame Test Apparatus, Flammability Test Chamber
Copper Block With Omega K - TypeThermocouple IEC 60695-11-5 Fig A.1 Standard Comply to IEC 60695-11-5 Fig A.1 Weight: 0.58 ± 0.01 g Material: Copper Thermocouple Brand:OMEGA (USA) K type Sheathed thermocouple Diameter: 0.5mm Wire type Install on the copper block View More
➤ Visit Website
ISO 9360-1 Heat And Moisture Exchangers (HMEs) For Humidifying Respired Gases In Humans-Measurement Of Moisture Loss
Price: Negotiable
MOQ: 1
Delivery Time: 30 days
Brand: KingPo
High Light:ISO 9360-1 Heat And Moisture Exchangers, ISO 9360-1 HMEs
ISO 9360-1 Anaesthetic and respiratory equipment –Heat and moisture exchangers (HMEs) for humidifying respired gases in humans –Part 1: HMEs for use with minimum tidal volumes of 250 ml Measurement of moisture loss- HME 6.2 Measurement of moisture loss 6.2.1 Principle The performance of an HME shall... View More
➤ Visit Website
Aluminum CAN/CSA-C358-03 Oven And Cooktop Test Blocks
Price: To be quoted
MOQ: 1
Delivery Time: 7 working days
Brand: KingPo
High Light:Aluminum Cooktop Test Blocks, Household Cooktop Test Blocks, CAN/CSA-C358-03 Oven Test Blocks
CAN/CSA-C358-03 Energy consumption test methods for household electric ranges Oven and Cooktop Test Blocks Cooktop test blocks Oven test block* Small Large Diameter(mm) 158±1.3 158±1.3 228.6±1.3 Appropriate height (mm) 71 71 76 Weight (kg) 3.85±0.05 3.85±0.05 8.62±0.05 Surface roughness(µm) rms 0.8 ... View More
➤ Visit Website
ISO5356-1 Figure A.1 22mm Plug And Ring Test Gauges For Testing Anaesthetic And Respiratory Equipment
Price: To be quoted
MOQ: 1
Delivery Time: 7 working days
Brand: Kingpo
High Light:Iec 60061 3, Go And Not Go Gauge
ISO 5356-1 Anesthetic and Respiratory Equipment – Conical Connectors – Part 1: Cones and Sockets ISO 5356-1 Introduction In clinical practice, several breathing attachments used in anaesthetic and respiratory equipment may have to be joined together to provide a suitable breathing system. Items of m... View More
➤ Visit Website
IEC 62368 Edition 3 Clause 9.6 CDV Status Steel Disc Aluminium Ring And Aluminium Foil For Wireless Charge
Price: To be quoted
MOQ: 1
Delivery Time: 7 working days
Brand: kingpo
High Light:Iec 60061 3, Go And Not Go Gauge
IEC 62368 Edition 3, CDV Steel Disc, Aluminium Ring And Aluminium Foil For Wireless Charge The following foreign object are used: 1. Steel disk: IEC CDV 62368-1/Ed3-Figure 47(including thermocouples) 2. Aluminium ring: IEC CDV 62368-1/Ed3-Figure 48(including thermocouples) 3. Aluminium foil: IEC CDV... View More
➤ Visit Website
Constant Walk In Environmental Chamber , Temperature And Humidity Chamber
Price: To be quoted
MOQ: 1
Delivery Time: 35 working days
Brand: KingPo
High Light:ozone test chamber, temperature and humidity chamber
Walk-in Constant Temperature-humidity Test Chamber Function Description Constant Temperature and Humidity Test Chamber a.k.a. environmental tester is specialized in testing properties of various kinds of material’s heat resistance,cold resistance,dry resistance and humidity resistance, which is appl... View More
➤ Visit Website
IPX1-6 Ingress Protection Test Equipmnent IEC60529 Waterproof Degrees Test Chamber IPX1/2 IPX3/4 IPX5/6
Price: To be quoted
MOQ: 1
Delivery Time: 25 working days
Brand: Kingpo
High Light:rain test equipment, salt spray test chamber
IEC60529 IPX1-6 Waterproof Degrees Test Equipment Ingress Protection Test Chamber Product Introduction IPX1/2, IPX3/4 ,IP5/6 waterproof degrees test equipment are designed and manufactured according to IEC 60529 < Degrees of protection provided by enclosures (IP Code)>. This equipment is appli... View More
➤ Visit Website
Universal Material Tester , Tensile Strength Testing Machine X-L0201 / X-L0202
Price: To be discussed
MOQ: 1
Delivery Time: 35 working days
Brand: KingPo
High Light:ozone test chamber, temperature and humidity chamber, Tensile Strength Testing Machine X-L0201
Universal Material Tester ( Tensile Strength Tester ) Technical Parameter type X-L0201 X-L0202 Test range(KN) 0-50 Force measurement level 1%,2%,5%,10%,20%,50%,100% Force measurement resolution 1/500,000FS of sensor Force measurement precision within sensor display value±0.5% Test speed 0.01-500mm/m... View More
➤ Visit Website
Glow Wire Tester, IEC60695-2-10 Flammability Testing Equipment ,Glow-wire apparatus
Price: To be quoted
MOQ: 1
Delivery Time: 30 working days
Brand: KingPo
High Light:Needle Flame Tester, Flammability Test Chamber
Glow Wire Tester, IEC60695-2-10 Flammability Testing Equipment ,Glow-wire apparatus Introduction Glow wire test is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695-2-10,UL 746A ,GB/T5169.10,GB4706.1.It makes required material(Ni80/Cr2... View More
➤ Visit Website
ISO 80369-7 Fig C1 Female Reference Luer Lock Connector With 1 Year Warranty
Price: To be quoted
MOQ: 1
Delivery Time: 7 working days
Brand: Kingpo
High Light:Iec 60061 3, Go And Not Go Gauge, Female Reference Luer Lock Connector
ISO 80369-7 Fig C1 Female Reference Luer Lock Connector With 1 Year Warranty ISO 80369-7 Fig C.1 —Female reference luer lock connector for testing female luer connectors for leakage, separation from unscrewing, stress cracking and non-interconnectable characteristics ISO 80369-7 FIGURE C.1 and C.3 F... View More
➤ Visit Website
ISO 6722-1 Clause 5.12.4.1 Apparatus For Sandpaper Abrasion Test / Auto Cable Insulation Jacket Abrasion Resistance Test
Price: To be quoted
MOQ: 1
Delivery Time: Negotiable
Brand: KingPo
High Light:High Frequency Spark Tester, Bend Test Machine
ISO 6722-1 Clause 5.12.4.1 Apparatus for Sandpaper Abrasion Test / Auto-Cable Insulation Jacket Abrasion Resistance Test Standards: ISO 6722-2006, QC/T 730-2005, JASO D608-92, JASO D611-94, SAE J1127, SAE J1128, JIS C3406 etc. Application: Applied to test the resistance to abrasion of Auto cable ins... View More
➤ Visit Website